COUNTER TYPE FULL AUTO SHUT- OFF DC32V; PUSH TO START ELECTRIC SCREWDRIVER WITH COUNTER POWER SUPPLY
COUNTER TYPE FULL AUTO SHUT- OFF DC32V; PUSH TO START ELECTRIC SCREWDRIVER WITH COUNTER POWER SUPPLY(#SP-C32HL60T/C)
Model # EA-C408PH
# EA-C412P
# EA-C416P
Weight: 480g (1.1 lb)
Length: 230mm (9.1")
Power source: DC20V or 32V
Bit Type:
HEX 5mm /HEX 6.35mm/ Ø4mm/ Ø5mm
Model # EA-C408PH
Torque Range: 1.0-8.0 kgf-cm
(0.88-7.04 lbf-in; 0.1-0.78 N.m)
Uploaded Speed: 2000 r.p.m. (HIGH)
Available Screw Machine Screw Ø:
1.6-3.0mm (0.06-0.12")
Available Screw Tapping Screw Ø:
1.6-2.6 mm (0.06-0.10")
Model # EA-C412P
Torque Range: 1.0-12 kgf-cm
(0.88-10.56 lbf-in; 0.1-1.18 N.m)
Uploaded Speed:
1000 r.p.m. (HIGH); 600 r.p.m. (LOW)
Available Screw Machine Screw Ø:
1.6-3.0mm (0.06-0.12")
Available Screw Tapping Screw Ø:
1.6-2.6 mm (0.06-0.10")
Model # EA-C416P
Torque Range: 3.0-16 kgf-cm
(2.64-14.08 lbf-in; 0.29-1.57 N.m)
Uploaded Speed:
1000 r.p.m. (HIGH); 600 r.p.m. (LOW)
Available Screw Machine Screw Ø:
2.3-3.5mm (0.09-0.14")
Available Screw Tapping Screw Ø:
2.3-3.0mm (0.09-0.12")
Features-
* Convenience design combine power supply and screw counter.
* Compatible with PLC based process control system; accurate counting on screw fastening.
* Auto leaning function built-in could judge the best setting value.
* Able to setting running speed & timing by Slow-Start function.
* Election on auto-reset retrieval or manual reset retrieval.
* Enhances the auto-identified screw fastening time mode; allow user to aim at simulating the duration of specific screw fastening.
* Displaying the number of unfinished screw counts; user can add external sensor switch to prevent operation error.
* Buzzer alert while complete afastening cycle. Internal signal for detecting screw count is also able to connect external devices.
* Capable with output and input signal; accurate calculation through the signal of sensor to prevent improper operation. Suitable for semi or full automatic production line.
